Harico IC-7000 136-174/400-520MHz Cross band repeater function radio
Harico IC-7000 136-174/400-520MHz Cross band repeater function radio
Description:
1. Before using cross band repeater function, you should turn on this function via programming software, please kindly note that you should read data from radio first when you program it.
2. Turn on the cross band repeater via programming software
--> Optional function
--> Cross band repeater
--> On.
--> Optional function
--> Cross band repeater
--> On.
3. If you want to turn on/off cross band repeater function by menu 11, please set via programming software
--> Optional function
--> Cross band repeater manual setting
--> On, then you can turn it on/off in the menu 11.
--> Optional function
--> Cross band repeater manual setting
--> On, then you can turn it on/off in the menu 11.
4. Note: when you use this function, please do not make transmitting frequency as 3 times of receiving frequency, or vice versa,
eg. TX one = 145.025MHz and RX = 435.075MHz or RX one = 145.025MHz and TX = 435.075MHz will cause radios to transmit all the time, even you turn off the radios, in this case, please just press PTT and change the frequency, radio will work properly, so please avoid to use such frequencies.
eg. TX one = 145.025MHz and RX = 435.075MHz or RX one = 145.025MHz and TX = 435.075MHz will cause radios to transmit all the time, even you turn off the radios, in this case, please just press PTT and change the frequency, radio will work properly, so please avoid to use such frequencies.
留言
張貼留言
Thank you for your message, we will reply as soon as possible
www.409shop.com.hk